1. Registering for the Forum

    We require a human profile pic upon registration on this forum.

    After registration is submitted, you will receive a confirmation email, which should contain a link to confirm your intent to register for the forum. At this point, you will not yet be registered on the forum.

    Our Support staff will manually approve your account within 24 hours, and you will get a notification. This is to prevent the many spam account signups which we receive on a daily basis.

    If you have any problems completing this registration, please email support@jackkruse.com and we will assist you.

Smokestacks

Discussion in 'Ask Jack' started by Tfreeman, Nov 15, 2020.

  1. Tfreeman

    Tfreeman New Member

    Do smokestacks emit low or high level nnEMF if they are only functioning on boilers and combustion turbines?

    trying to break this down for a friend:
    “The facility operates three very large boilers rated at 836 MM Btu/hr, six large boilers rated at 180 MM Btu/hr each, and two combustion turbines rated at 223 MM Btu/hr each. The very large boilers have been in operation since 1955, the large boilers have been in operation since 1977, and the turbines have been in operation since 1968. The boilers combust residual oil, and are permitted to combust natural gas. The turbines combust distillate oil. The sulfur content in the distillate and residual oils is regulated by 6 NYCRR Subpart 225-1 and the limits are 0.20% and 0.30% by weight, respectively.”

    https://www.dec.ny.gov/dardata/boss/afs/permits/262040001900006_r1.pdf
     
    Last edited: Nov 15, 2020
  2. Jack Kruse

    Jack Kruse Administrator

    Depends on what their anetennas emit
     
    Tfreeman and John Schumacher like this.

Share This Page